PTI logo
contact

 
Industrial Products Kyflon® 3000
Kyflon 3040 Kyflon® 3050 Kyflon® 3060 Kyflon 3070
Kyflon 3073 Kyflon 3080

Kyflon® 3090 Kyflon® 3091 Kyflon® 3092
Kyflon® 3098
Kyflon® Cord
Vulcanized O-Rings

Sanifluor1040
Sanifluor® 9000
Extreme Low Temperature FKM No. 6075

Extreme Low Temperature FKM No. 6090
FDA compliant
Sanifluor 1000

Viton® Extreme 2001
Semiconductor Grade

Kyflon 5000
Kyflon 5300 Kyflon 5400
Kyflon 5500
Product Knowledge

Contact Us

The High Performance Seal Division of PTI, specializes in the development and production of Perfluoroelastomer, (KYFLON™ Family of Compounds) AFLAS®, (Sanifluor® Family of Compounds) and Viton® and Viton® Extreme rubber compounds. Our wide selection of Kyflon™, Sanifluor®, Viton® and Viton® Extreme materials allow the user to target specific application requirements. These advanced materials are used to fabricate O-Rings, Seals and Gaskets that provide outstanding service and reliability in a variety of demanding environments in the industrial, food & beverage, oil field, pharmaceutical and semiconductor production industries. Our only focus is to produce sealing elements capable of providing critical long term service in demanding applications.


In general, “value in use” should be the guiding principle for selecting an O-Ring or seal in any given application regardless of the industry. O-Rings constructed of standard materials may suffice in many applications, for a period of time but it’s a good bet that they will ultimately fail when exposed to higher temperatures or hostile chemical environments. Typically, the higher cost of a properly formulated high performance base polymer such as a perfluoroelastomer, Aflas or Viton Extreme, can be recouped many times over by providing long service life and reliability. Selecting the proper high performance O-Ring can increase the mean time between failure, (MTBF) thereby preventing costly unscheduled down time. Dangerous leakage can also be eliminated by the selection of the optimum O-Ring for the given service conditions.

The following table lists several of the O-Ring compounds that are produced by the High Performance Seal Division of Process Technologies Inc.
All are available in standard AS 568 O-Ring.

ASTM
D418
Compound
Name
Shore-A
Hardness
Description
FFKM Kyflon™ 3000 75    High Temperature Capability to 600°F
FFKM Kyflon™ 3001 85    Non-Carbon Black Formulation
FFKM Kyflon™ 3050 75    FDA USP Class VI Compliant High Temp.
FFKM Kyflon™ 3055 75    FDA USP Class VI Compliant White Compound
FFKM Kyflon™ 3060 75    Good Hot Water & Steam Resistance
FFKM Kyflon™ 3080 80    High Temperature Capability to 600°F
FFKM Kyflon™ 3084 80    High Temperature Capability to 630°F
   Steam to 572°F
FFKM Kyflon™ 3085 80    General Purpose Compound to 570°F
FFKM Kyflon™ 3090 90    ED Resistant
FFKM Kyflon™ 3098 90    Low Temperature (-40°C) Meets Norsok M-710
FEPM Sanifluor® 1000 80    AFLAS® FDA USP Class VI Compliant
FEPM Sanifluor® 1040 80    AFLAS® General Purpose Compound
FEPM Sanifluor® 9000 90    AFLAS® 90 Durometer ED Resistant
FKM Viton® Extreme 2001 75    Viton® Extreme FDA Compliant
FKM FKM 6075 75    Very Low Temperature (-65°F) Compound
FKM FKM 6090 90    Very Low Temperature (-65°F) Compound

 

 

 
New from Process Technologies